Detailed Product Description

Integrated Pressurized Solar Water Heater

•  

  Main technical data
  1. Externality size: 450mm*310mm*150mm
  2. Max. Self consumption: ≤3W
  3. Accuracy of temperature measuring: 2C
  4. Range of temperature measuring: 0~99CC
  5. Power of controlled pump (temperature difference circulation pump, water-using
  End circulation pump): <600W
  6. Electronical booster power: ≤3000W
  7. Input signal: 3 temperature sensors (for top of tank, for heat collector, for bottom
  Of tank)
  8. Output signal: 3 (electronic booster, temperature difference circulation pump and
  Water-using end circulation pump)
  9. System working pressure: 0.6MPA
  
  Components of pipeline
  1. Safety valve: Make sure the system safety working
  2. Global valve, check valve: Brass material
  3. WILO pump: This pump is a standard device in the system, we can choose any excel
  Among three work scopes.
  4. Manometer: Adopt hydraulic aseismatic manometer display system pressure scopes 0-10PA
  5. Connect of expansion pot: Insert expansion pot, avoid the system working at minus
  Pressure.
  6. Flow sensor: Timely monitor medium flow of the whole system.
  7. Exhaust setting: Adopt print steel tube, it can release air cause of medium flow
  In the pipeline. According air quantity and frequency which cause of system, we
  Can examine whether this system have leakage phenomenon.
  8. Pipeline temperature display: Medium temperature between right trip and return
  Trip, can be display at first time. Temperature probe is insert at a protection shield.
  Do not need to turn off any parts when replace it.
  9. Medium inject: Put handle whorl 90C. Medium can be injected in it.
  10. Heat preservation material: EPS
  11. Whorl: 1/2 inch.